SCX Tech Support Forum

This Forum is for support on items purchased from Supercircuits or Security Cameras Direct.

You are not logged in.

Post a reply

Write your message and submit
Options

Go back

Topic review (newest first)

jharris
2017-02-09 14:50:19

First we need to match the resolution and refresh rate of the television with what the dvr is expecting to output. Without a monitor this may be difficult because you can't see what you're doing. The way we get around this is by logging into the DVR through the network. You will need to have a windows computer and install this program:

https://www.supercircuits.com/media/doc … tility.zip

Once that program is installed you select discovery tool and will take that ip address listed for your DVR.

Use either internet explorer or Firefox and type that ip address into the address bar at the top.

Log into your unit with the default username and password. Typically admin as the username and 1111 as the password.

From there you will select Configuration.

Under system settings you will select menu output.

These are the settings here that need to be changed to get picture on the television as long as the tv supports one of these resolution or refresh rate options.

Board footer

Powered by FluxBB